tags:
Short description:
BKV type push buttons are used to operate low-voltage, high-current electrical devices and equipments and to switch circuits.
Push buttons without housing
Push buttons with housing
Parts, accesories
Technical details:
Protection | For devices with protection class I |
Installation | The push buttons can be installed (with 2 max. M 4 countersunk head screws) in the mounting opening of the size described in the technical information or (with 3.5×16 mm pan head sheet metal screws) in the MT; 2MT; 3MT plastic housings manufactured for them. The device is also suitable for connecting a power cable. We recommend using the switch only in clean environments. |
Protection | IP 00, IP 40 after installation in MT housings |
Operating mode | The push buttons are moved to the closed or open position (depending on their function) by pressing the operating buttons. When the button is released, the push buttons return to their default position. |
Actuation force requirement | ~12,5 N |
Switch travel | 8,5 mm |
Connection terminals | The push buttons are equipped with screw-type connection terminals, which can be connected to wires without preparation. |
Connection wire | For flexible wire, 0.5-0.75 mm2 cross-section wire |
For solid wire | 0.5-1 mm2 cross-section wire |
| Electrical load capacity and service life according to EN 61058-1 | 2 A 400 V~ 1E4 |
Flammability class of plastic parts | For plastic parts in contact with live parts V0 (according to UL 94) |
Creep paths and air gaps | min. 3 mm |
Application category: | D (IEC 335-1) |
Applied standard | MSZ EN 61058 |