tags:
Short description:
The S-11… type contact block is used to connect various circuits indirectly (through a pressure element). It can therefore be used as a limit switch to detect end positions, or as a safety switch to control the removal of covers.
S-11
Technical specifications:
Touch protection | For devices with touch protection class III. |
Installation | The contact block is mounted on the mounting plate with an M4 screw according to the drawings. |
Protection | IP 00, or the protection provided by the housing after installation |
Operating mode | When the rod of the S-11.. contact block is pressed, the NC contact opens when the displacement reaches 1.5 mm, and the NO contact closes after reaching 5 mm. The total pressing distance of the pressure element is 6.5 mm. After the pressure force acting on the rod is removed, the pressure element returns to its normal state. |
Connection terminals | The S11.. contact blocks are equipped with screw-type connection terminals. |
Electrical load capacity and service life: |
|
Rated current | 10 A |
Rated voltage | 50 V ~ |
Service life | 1E4 switching cycles |
Flammability rating of plastic parts | For plastic parts in contact with live parts min. V2 (according to UL 94) |
Creeping distances and air gaps | min. 3 mm |
Creeping resistance | PTI 250 |
Application category | D (IEC 335 – 1) |
Connecting cable | max. 1.5 mm2 |
Relevant standard | MSZ EN 61058-1 |